KOH impregnated activated carbon Introduction:

Generally, high-quality pellet activated carbon or high-quality coal granular activated carbon is used as the basic activated carbon, KOH solution is prepared according to the concentration of 35-50%, and a trace amount of Na3PO4 is added as a wetting agent. Or it can be carried on the charcoal by spraying until it reaches 7.5-12.0% of the charcoal amount. The KOH-impregnated activated carbon produced by Jiasheng has good performance of removing H2S.

KOH impregnated activated carbon index:

KOH impregnated activated carbon features:

The adsorbent plus KOH impregnation can significantly increase the specific surface area of the coal-based activated carbon, and the coal-based activated carbon with a specific surface area > 1500m2/g was prepared by the steam activation method.

After the impregnation of KOH, the alkali-soluble substances in the pores of the activated carbon of the basic carrier can be removed, and the ash content of the activated carbon can be reduced. The adsorption performance of activated carbon was also improved.

KOH impregnated activated carbon picture:

KOH impregnated activated carbon application:

KOH-impregnated activated carbon is installed in individual or collective protective equipment, which can be used to purify and adsorb acid gases such as H2S gas.

Packing and delivery:

1. Big bag :500kg/600kg jumbo bag

2. Small bag:25kg/20kg PP bag

3. 25kg Kraft paper bag

KOH impregnated activated carbon manufacturer according to you requirements shipping :

1.20GP FCL :10-16TONS

2.40GP FCL: 20-26TONS

3.40HQ FCL:22 TONS or 26 TONS

The above quantity without pallet ,the goods will be sent within 7-15days after receiving your order.